Description
- DIP 40 Pin IC Socket For Easy Insert/Removal of Chip.
- On-board MAX232 Circuit for Easy Communication with a PC & other RS232 serial devices (GPS modules, GSM Modems, etc)
- High-quality FR-4 (1.6 mm) PCB
- On-Board bridge rectifier so the board can accept both AC & DC Input voltages power supply
- 5 mm Power Plug-in DC Jack | Power ON-OFF switch.
- 5V regulator (LM7805) circuit.
- Power indication RED LED.
- On-Board GREEN USER LED at P2.0 through jumper JP3.
- On-Board Input User Switch P3.3 through jumper JP2.
- On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
- On-board Quartz Crystal 11.05892 MHz
- Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip
- Port Extensions for all PORT with Detailed Labeling for Easy Identification of Pin
- External Pull-Up resistors for Port 0
- On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
- Extra Vcc bus (5V and 12V) & GND bus for POWER Supply to the External Peripheral.
- Four 3mm mounting holes for easy mounting
- On-board Reset button.Memory Slots Available: Does Not Apply
Flash Memory Installed Size: 8 KB
Ram Memory Technology: DATA RAM 256 Bytes
Holder Capacity: Single 8051 40 PIN DIP Chip OnBoard
Operating System: User Defined Application Program or RTOS (Real Time Operating System), Embedded Systems
Processor Brand: Atmel
Processor Speed: 11.05 MHz
Processor Count: 1
Processor Socket: DIP 40-Pin
Compatible Processor Types: 89S51,89S52,89CXX,89V51RD2, SST, etc.40-Pin 8051 IC
Processor Model Number: AT89S52
Hardware Platform: PC
Special Features: DIP 40 Pin Microcontroller IC Socket. For Insert and Remove of IC | On-board RS232 Circuit for Easy Communication with a PC & other RS232 serial devices (GPS modules, GSM Modems, RFID, etc) | Extra Vcc bus (5V and 12V) & GND bus for POWER Supply to the External Peripheral, OnBoard Reset button | Quartz Crystal 11.05892 MHz | GREEN USER LED at Pin P2.0 | Input User Switch Pin P3.3 | Input External Interrupt Switch (INT1) at P3.3 through jumper JP2 | On-board bridge rectifier so 8051 Development board can accept both AC & DC Input voltages Power supply | 5mm Power Plug-in DC Jack | Power ON-OFF switch | 5V regulator (LM7805) circuit | Power indication RED LED
Reviews
There are no reviews yet.