ESP32 CAM WiFi Module with OV2640 Camera Module 2MP

590.00 Inc. GST

  • Operating voltage supply: 2.7 V – 3.6 V
  • Average operating current: 80 mA
  • Sensor type: Hall sensor
  • Bluetooth: v4.2 BR/EDR and BLE
  • No. of Pins: 38

This is ESP WROOM 32 MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding.

At the core of this module is the ESP32S chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz.

The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C.

Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA.

In addition, this module can support data rates of up to 150 Mbps and 22 dBm output power at the PA in order to allow for the widest physical range.

Out of stock


  • Support OV2640 and OV7670 cameras with built-in flash
  • Low-power dual-core 32-bit CPU for application processors
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Support multiple sleep modes
  • Support for images WiFI upload
  • Embedded Lwip and FreeRTOS
  • Up to 240MHz, up to 600 DMIPS
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • Support STA/AP/STA+AP working mode
  • Support for serial local upgrade and remote firmware upgrade (FOTA)
  • Support TF card
  • Support Smart Config/AirKiss One-click distribution network


There are no reviews yet.

Be the first to review “ESP32 CAM WiFi Module with OV2640 Camera Module 2MP”

Your email address will not be published. Required fields are marked *