Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004

2,300.98 Inc. GST

Features and Electrical Characteristics

  • Transmission Frequency: 2.4GHz to 2.5GHz
  • Number of Channels: 16 Direct Sequence Channels
  • Featured with UART (250 Kb/s maximum) and SPI (5 Mb/s maximum) interface
  • Featured with software adjustable transmitting power
  • Indoor/Urban Range: 200ft
  • Outdoor RF line-of-sight Range: up to 4000ft
  • Transmit Power Output: 6.3mW (8dBm) in Boost mode,2mW (3dBm) in Normal mode
  • RF Data Rate: 250,000 bps
  • Receiver Sensitivity: -102dBm in Boost mode, -100dBm in Normal mode
  • Supply Voltage Range: +2.1V to +3.6V
  • Operating Current: 33mA (at3.3V, for Normal mode) , 45mA (at 3.3V,for Boost mode)
  • Idle Current: 9mA
  • Maximum output current on all pins together: 40mA
  • Power-down Current: <1uA @25C
  • ESD protection: 3000V
  • Operating Temperature: -40?C to 85? C

Out of stock

SKU: R11B03S01 Categories: ,


This is Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004. The XBee 2mW Wire Antenna S2C, the latest of its kind in Series 2, offers point to multipoint device connectivity with ease, providing cost-effective wireless solutions for electronic devices. They are interoperable with other ZigBee feature set devices, including devices from other vendors.

This version (S2C) of XBee ZigBee Series 2 module utilizes EM357 transceiver. The EM357 transceiver is faster, has the lower current draw, and has significantly more RAM and Flash. These advanced features allow EM357-based modules to support more network traffic, have more memory for code updates, and operate more efficiently.

These are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. For current customers interested in taking advantage of these performance improvements, the XBee Zibee migration guide will assist with migrating from S2B XBee ZigBee modules to the S2C XBee ZigBee modules.

This XBee module, similar to its predecessors has 2 mm pin spacing. You could use one of our own adapter boards and easy interfacing within any project. If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.


Weight 3 g
Dimensions 028 × 024 × 039 mm


There are no reviews yet.

Be the first to review “Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004”

Your email address will not be published. Required fields are marked *